Dynamic Range; Digital Audio Out - Kenwood DVF-R4050 Instruction Manual

Multiple dvd / vcd / cd player
Hide thumbs Also See for DVF-R4050:
Table of Contents

Advertisement

www.DataSheet4U.com

Dynamic Range

DVD
1 Press Cursor up/down (5/∞) keys
2 Press Cursor up/down (5/∞) keys
÷ Press PLAY key to resume normal playback.
DTS disclaimer clause
When playing DTS-encoded (CDs, DVDs), excessive noise
will be exhibited from the analog stereo outputs. To avoid
possible damage to the audio system, the consumer
should take proper pre-cautions when the analog stereo
outputs of the DVD player is connected to an amplifica-
tion system. To enjoy DTS Digital Surround™ playback,
an external 5.1 channel DTS Digital Surround™ decoder
system must be connected to the digital output (S/P DIF,
AES/EBU, or TosLink) of the DVD player.
4
DataSheet
U
.com
on the remote to select Dynamic
Range on the set up menu dis-
play, then press the ENTER key.
MULTI CONTROL
ENTER
(Dynamic Range menu appears.)
on the remote to select Dynamic
Range mode (on or off), then press
the ENTER key.
ENTER
MULTI CONTROL

Digital Audio Out

DVD
PCM
Dolby Digital : Choose this setting if you connected
DTS
For Europe and U.K.
MPEG-2/DTS : Choose this setting if you connected
÷ Press PLAY key to resume normal playback.
Note
Note
When the DTS of Digital Audio Out or the Dolby
Digital setting and the format recorded on the disc
are different from each other, audio may not be put
out. Please switch according to the indication on the
disc.
www.DataSheet4U.com
Set Up functions
DV-505/DVF-R4050 (EN/K,E,T,Y,X)
: Choose this setting for all connection
scenarios, except the Dolby Digital or
DTS receiver or decoder connection.
Dolby Digital receiver or decoder to
your DVD player.
: Choose this setting if you connected
DTS receiver or decoder to your DVD
player
DTS receiver, decoder or MPEG audio
to your DVD player.
1 Press Cursor up/down (5/∞) keys
on the remote to select Digital Au-
dio Out on the set up menu dis-
play, then press the ENTER key.
MULTI CONTROL
(Digital Audio Out display appears.)
2 Press Cursor up/down (5/∞) keys
on the remote to select specific
Digital Audio Out mode, then
press the ENTER key.
MULTI CONTROL
www.DataSheet4U
www.DataSheet
www.DataSheet
www.DataSheet
33
ENTER
ENTER
4U.com
4U
4U
.com
.com
.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvf-505

Table of Contents