Connecting Drive Belt
Install the Picking Head cylinder positioning the ports so that they are closest to the air valve assembly.
Leave the bolts loose until the cylinder shaft is connected to the Picking Head. The Picking head must be
in the fully raised position before tightening the cylinder. Tightening the cylinder in a lowered position
will cause the cylinder to bind. Tighten the shaft nut with a 15/16" socket and a 17mm wrench to hold
the shaft. Now secure the cylinder mounting bolts.
Installing Picking Head Cylinder
Connect the airlines to the cylinder (2) as shown in the picture.
Tightening Cylinder Bolts
20