Safe Operating Procedures; Hazardous Zone - Acer Wood Runner Manual

3 SAFE OPERATING PROCEDURES

3.1 HAZARDOUS ZONE

The shaded area in the diagram below is the HAZARDOUS ZONE. This includes the entire area in which the
Gantry travels inside a perimeter bounded by the Light Curtain, Perimeter Guard, Runway and Infeed Deck.
This area must be totally surrounded by the Perimeter Guard fence and Light Curtain. There must never be
personnel inside this area while the system is enabled. Serious injury or death may occur from moving
machine parts inside this area. Never reset the safety system or enable the Wood Runner system unless you
are sure all personnel are clear of the Hazardous Zone.
Runway
Perimeter Guard
NEVER
enter the Hazardous Zone while the machine is operating. Serious injury or death could result!
Infeed Deck
10
Saw
Shaded Area is
Hazardous Zone
Light Curtain
Lumber Cart