Mounting The Appliance On The Wall - Viessmann Vitoplanar EI2 Installation Instructions For Contractors

Mounting the appliance on the wall

1. Select the position for the mounting brackets
depending on the product type and installation
type. See page 9 onwards.
2. Mark the drill holes using a spirit level and drilling
template (standard delivery).
!!!
3. Drill holes.
8
8 x
8 x
4. Secure the mounting brackets using suitable rawl
plugs and screws.
Danger
The appliance may fall off the wall if unsuita-
ble fixing materials are used. This may result
in dangerous injuries and damage to the
appliance.
Secure the appliance only with the mounting
brackets for wall mounting included in the
standard delivery.
Only use screws and rawl plugs that are
suitable for the type of wall (masonry, con-
crete, plasterboard, etc.).
5. Place the infrared heater on the mounting bracket
and secure with screws.
!
Please note
Mechanical stress on the surface, e.g. if
people or objects lean against it, can lead to
damage.
Prevent force being applied to the surface.