Mounting the appliance on the wall
Fig. 3
Wall mounting bracket
1. Mark out 6 drill holes using a spirit level and the
wall mounting bracket.
Fig. 4
2. Drill holes.
8
420
373
400
3. Secure the wall mounting bracket in place using
4. Connect the infrared heater.
suitable rawl plugs and screws.
Note
If required, route the connecting cable up or down
from behind the wall mounting bracket.
Danger
The appliance may fall off the wall if unsuita-
ble fixing materials are used. This may result
in dangerous injuries and damage to the
appliance.
Only secure the appliance to the ceiling
using the wall mounting bracket provided in
the standard delivery.
Only use screws and rawl plugs that are
suitable for the type of wall (masonry, con-
crete, plasterboard, etc.).