Before Installation; Clearance Dimensions; Installation Room Requirements - Viessmann Vitoplanar EI2 Installation Instructions For Contractors

Before installation

Danger
The appliance may fall off the wall if unsuitable
fixing materials are used. This may result in dan-
gerous injuries and damage to the appliance.
Secure the appliance only with the mounting
brackets for wall mounting included in the stand-
ard delivery.
Only use screws and rawl plugs that are suitable
for the type of wall (masonry, concrete, plaster-
board, etc.).
Fig. 1 Mounting brackets and hexagon screws
(standard delivery)

Clearance dimensions

Fig. 2 Minimum clearances

Installation room requirements

!
Please note
Impermissible ambient conditions can lead to
damage to the appliance (risk of overheating)
and to a fire hazard.
■ Do not use the appliance in the immediate
vicinity of a bathtub, shower or swimming pool.
■ Do not install the appliance directly below a
wall socket.
The appliance must not be used in small
■
rooms inhabited by persons who cannot leave
the room independently, unless constant moni-
toring is ensured.
!
Please note
Installation on uneven surfaces can cause dam-
age to the heating surface due to stress.
Only fit the appliance to level walls.
Standard delivery for wall mounting:
■ 2 x mounting brackets
■ 4 x hexagon screws M8 x 16
Danger
If the appliance is operated without maintaining
the minimum clearances, flammable objects
may catch fire.
Observe the specified minimum clearances.
Note
When installing the appliance in bathrooms, observe
the safety zones according to DIN VDE 0100 part 701!
Note
Horizontal or vertical installation is possible.
7