Zanussi ZWT816PCWA User Manual page 7

1
G
We recommend that you keep the packaging and the transit bolts for any movement of the
appliance.
2
F
4. Return the appliance in vertical position and
remove the socket polystyrene protection.
5. Remove the power supply cable and the drain
hose from the hose holders.
It is possible to see water flowing
from the drain hose. This is due to
the testing with water of the appli-
ance in factory.
6. Remove the three bolts, the hose holders and
plastic spacers by using the spanner supplied
with the appliance.
7. Close the holes with the plastic caps you find
in the user manual bag. Put the smallest cap F
in upper hole and the two bigger caps G in low-
er holes.
7