Zanussi ZWT816PCWA User Manual page 35

2. Place a suitable bowl below the drain pump access
to collect the water that flows out.
Always keep a rag nearby to dry up any water spill-
ages when removing the filter.
180˚
3. Turn the filter 180 degrees in anti-clockwise direc-
tion to open it, without removing. Let the water flow
out.
4. When the bowl is full of water, turn the filter back
and empty the container.
5. Repeat the steps 4 and 5 until the water stops to
flow out.
6. Turn the filter anti-clockwise to remove it
1
2
7. If it is necessary, remove fluff and objects from the
filter recess.
Make sure that the impeller of the pump can rotate. If it
does not rotate, contact the Authorised Service Cen-
tre.
35