5. Screw the bracket fixing screws to the back panel of device, then hang the device to the
mounting bracket on the pole.
6. Screw the grounding screw to fix IOT-G65 to the mounting bracket.
4. Access the Web GUI of IOT-G65
IOT-G65 provides web-based configuration interface for management. If this is the first time
you configure the gateway, please use the default settings below:
ETH IP Address: 192.168.23.150
Wi-Fi IP Address: 192.168.1.1
Username: admin
Password: password
4.1 Web Access via Ethernet Port
Connect PC to IOT-G65 ETH port directly or through PoE adapter. The following steps are
based on Windows 10 operating system for your reference.
A. Go to "Control Panel" → "Network and Internet" → "Network and Sharing Center", then
click "Ethernet" (May have different names).