LINOVISION IOT-G65 Quick Start Manual page 8

positions you marked previously on the wall.
4. Insert four wall plugs into the holes respectively.
5. Mount the mounting bracket horizontally to the wall by fixing the wall mounting screws
into the wall plugs.
6. Screw the bracket fixing screws to the back panel of device, then hang the device to the
mounting bracket on the wall.
7. Screw the grounding screw to fix IOT-G65 to the mounting bracket.
3.4.2 Pole Mounting
Preparation: mounting bracket, bracket fixing screws, hose clamp and other required tools.
1. Before you start, make sure that your SIM card has been inserted, your antennas have
been attached and that all cables have been installed.
Note: Do not connect device to power supply or other devices.
2.Loosen the hose clamp by turning the locking mechanism counter-clockwise.
3.Straighten out the hose clamp and slide it through the rectangular rings in the mounting
bracket, wrap the hose clamp around the pole.
4.Use a screwdriver to tighten the locking mechanism by turning it clockwise.