3. Attaching the blade guard:
Secure the guard (3) facing the operator to the support above the trimmer head on the lower shaft
(4) using the supplied bolt (5).
Warning! Use only original manufacturer's replacement parts, accessories and attachments. Failure
to do so can cause poor performance, possible injury and may void your warranty. Never use the
trimmer without the guard securely attached!
4. Assembly and disassembly of the cutting head
a) Assembly
Block rotation of the shaft (1) with a proper hex wrench. Fit the cutting head (2) screwing it clockwise.
b) Disassembly
Block rotation of the shaft (1) with a proper hex wrench. Remove the cutting head (2) unscrewing it
anticlockwise.
WILD BADGER POWER • WILDBADGERPOWER.COM
9