Badger Basket WB25GTE Operator's Manual page 12

4. Pull the starting cord again until the engine starts.
Attention:Allow the engine running idling for 1min before starting work.
5. To begin trimming, press the lock lever down with your thumb and pull the throttle lever with
your fingers to increase power.
6. To adjust the line length while working: This trimmer is fitted with a "Bump-N-Feed" head. To
release more line, tap the cutting line head against the ground with engine at top speed. Line
will be released automatically and the knife on the blade guard will cut off the excess.
7. If any problems occur during operation, release the throttle lever and press the stop switch.
The machine will stop running.
If the machine is still warm from running, warm start the engine as follows:
1. Stay the airfilter choke lever to the RUN position
2. Pull the starting cord to start the engine.
12 WB25GTE CURVED SHAFT GRASS TRIMMER