Basic Assembly; Starting Instructions - Badger Basket WB25GTE Operator's Manual

QUICK START GUIDE

BASIC ASSEMBLY

For detailed assembly instruction consult the assembly section of
this operators manual.
1. CONNECT SHAFTS
By removing plug & cap,
attaching the two shafts
and tightening the knob.

STARTING INSTRUCTIONS

Do not start the unit until it has been completely assembled.
A w l y a f s l o o l w
1. FILL WITH 50:1 MIX
4. PULL 3-5X
Until the engine
begins to try to start.
2
2. ATTACH HANDLE
Using the bolts and
hex wrench provided.
t e h e s r p c o d e r u
2. MOVE CHOKE
By moving the priming lever
up to the START position.
5. MOVE CHOKE TO RUN
By moving the priming lever
down to the RUN position.
s e w h n e o c d l
TO START
WB25GTE CURVED SHAFT GRASS TRIMMER
3. ATTACH GUARD
Using the bolts and
hex wrench provided.
s a t t r n i t g e h r t
3. PRIME ENGINE 10X
By pressing the priming
bulb beside the gas cap.
6. PULL UNTIL THE
ENGINE STARTS
m i m . r e