Table of Contents
Advertisement
tools that have been turned on invites
accidents.
4.
Remove any adjusting key or
wrench before turning the power
tool on. A wrench or a key left
attached to a rotating part of the
power tool may increase the risk of
injury.
5.
Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool
in unexpected situations.
6.
Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair
can be caught by moving parts.
7.
If devices are provided for the
connection of dust extraction and
collection facilities, ensure that these
are connected and properly used. Use
of dust collection can reduce dust-
related hazards.
Power Tool Use and Care
1.
Do not force the power tool. Use
the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it is designed.
Do not use the power tool if it can't
2.
be turned on and off by its switch. Any
power tool that cannot be controlled with
5
the switch is dangerous and must be
repaired.
3.
Disconnect the plug from the
power source and/or the battery pack
from the power tool before making any
adjustments, changing accessories, or
before storing the power tool. Such
preventive safety measure reduces the
risk of starting the power tool
accidentally.
4.
Store idle power tools out of reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate it. Power tools
are dangerous in the hands of untrained
users.
5.
Maintain the power tools. Check
for misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tool's operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
6.
Keep cutting tools sharp and
clean. Properly maintained cutting tools
with sharp cutting edges are less likely
to bind and are easier to control.
7.
Use the power tool, accessories
and tool bits etc. in accordance with
these instructions, taking into account
the working conditions and the work to
be performed. Use of the power tool for
Advertisement
Table of Contents
