Maintenance And; Care - Redback E212C Operation Manual

No. Part No.
31 25170060
32 60170740
33 60370150

MAINTENANCE AND

CARE

1. Remove the battery pack from
chainsaw, when not in use.
•
Before moving from one place to
another before servicing
•
Before changing accessories or
attachments, such as saw chain and
guard
2. Inspect chain saw before and after
each use. Check the saw closely if the
guard or other part has been damaged.
Check for any damage that may affect
operator safety or operation of saw.
Check for alignment or binding of
moving parts. Check for broken or
damaged parts. Do not use chain saw if
damage affects safety or operation.
Have damage repaired by the
authorized service center.
23
Description QTY
Oil tank
cover
Tapping
screw
O-ring
No. Part No.
1 64 70670220
1 65 70040120
1 66 60240050
3. Maintain chain saw with care.
•
Never expose saw to
rain.
•
Keep the chain sharp, clean, and
lubricated for better and safer
performance.
•
Follow steps outlined in this
manual to sharpen chains.
•
Keep handles dry, clean, and free
of oil and grease.
•
Keep all screws and nuts tight.
4. When servicing, use only identical
replacement parts.
5. When not in use, always store chain
saw in a high or locked place, out of
children's reach in a dry place.
Replacing Saw Chain/Chain
bar
Replace chain when cutters are too
worn to sharpen or when chain breaks.
Only use replacement chains noted in
Description QTY
Chain wheel 1
Check ring 1
Spring
2
washer