Table of Contents
Advertisement
1.
Unpack all parts carefully.
2.
Place the chainsaw on any
suitable flat surface with the motor
facing downwards.
3.
Fit the chain onto the drive
sprocket and guide the chain bar. So
that the fastening bolt lit into the keyway
of the chain bar. Check if all parts are
seated properly and hold the chain and
chain bar in a level position.
4.
Fit cover. Check that arrows are
still aligned
5.
Use the chain tension knob to get
the correct tension in the chain. Finally
tighten the sprocket cover knob.
Battery Pack Assembly
Put the battery pack (10) as shown
above, taking care to press any button
to prevent accidental starting.
16
Lubrication
Important: the chainsaw is
not supplied filled
with oil. It is essential to fill with oil
before use. Never operate the chainsaw
without chain oil or at an empty oil tank
level, as this will result in extensive
damage to the product.
Chain life and cutting capacity depend
on optimum lubrication. Therefore, the
chain is automatically oiled during
operation via the oil outlet.
Advertisement
Table of Contents
