Assembly & Adjustment - V-fit FMTC3 Assembly & User Manual

Note
There may be a small amount of
built in resistance present at first
due to the general tight fit of the
new bearings, bushes and the
drive belt.
Note
The foot print for this product
is 720mm x 560mm.
The assembled weight is 17.2kg
User Information
RESISTANCE ADJUSTMENT
To adjust the pedalling resistance during use, start by turning the
Tension Controller Knob (19) fully ANTI-CLOCKWISE at the start of
your workout. Gradually increase the pedalling resistance by turning
the Tension Controller Knob CLOCKWISE as required.
When you have finished your routine, turn the Tension Controller Knob
(19) fully ANTI-CLOCKWISE again to ensure that the Tension Controller
Cable is not under tension when your Space Saver Cycle is not in use.
19
Page 13