Cleaning Dust Separator - LG VK83 Series Owner's Manual

How to use
Kullanım
If suction power decreases after cleaning the dust
tank, clean the air filter and the motor safety filter.
The air filter and the motor safety filter are located
on the top of the vacuum cleaner as above the
figure.
• Open the vacuum cleaner cover by pushing the
button.
• Grasp the handle of the dust separator and take
out it.
• Open the guide cover by pulling the guide cover
lever and remove the dust.
• Open the air filter cover by pushing the air filter
cover lever and take out the air filter.
• Separate the motor safety filter from the dust
separator.
• Wash the air filter and the motor safety filter.
• Do not wash filters with hot water.
• Dry fully in shade so that moisture is entirely
removed.
• The air filter and the motor safety filter should be
cleaned as above the figure.
24

Cleaning dust separator

- Inside of dust separator, air filter, motor safety filter
Toz ayırıcının temizlenmesi
- Toz ayırıcının içi, hava filtresi, motor güvenlik filtresi
Dust separator
Toz ayırıcı
Guide cover lever
Kılavuz kapak kolu
Guide cover
Hava filtresi kapağı
Kılavuz kapağı
Air filter cover lever
Hava filtresi kapak kolu
WARNING
Dry fully for more
than 24 hours in
shade.
NOTICE
If filters are
damaged, do not
use them. In this
cases, contact LG
Electronics Service
Agent.
Wash filters at
least Once a
month.
Air filter cover