Storing The Strongest Broadcast Frequencies (Bsm); Radio Settings - Pioneer AVIC-Z710DAB Operation Manual

TIPS
• By pressing then touch or
• By pressing then touch and hold

Storing the strongest broadcast frequencies (BSM)

The BSM (best stations memory) function automatically stores the six strongest
broadcast frequencies under the preset channel keys [1] to [6].
NOTES
• Storing broadcast frequencies with BSM may replace those you have already saved.
• Previously stored broadcast frequencies may remain stored if the number of frequencies stored has
not reached the limit.
1
Touch the preset channel list display key.
2
Touch to begin search.
While the message is displayed, the six strongest broadcast frequencies will be
stored under the preset channel keys in the order of their signal strength.
To cancel the storage process
1
Touch [Cancel].

Radio settings

1
Press .
2
Touch then .
The system setting screen appears.
3
Touch [AV Source Settings].
4
Touch [Radio Settings].
The menu items vary according to the source.
Menu Item
[Local]
[Off]
FM: [Level1] [Level2] [Level3] [Level4]
MW/LW: [Level1] [Level2]
42
En
, you can also switch the preset channels.
or and releasing it, you can also perform seek tuning.
Description
Local seek tuning allows you to only tune into
radio stations with sufficiently strong signals.
NOTE
[Level4] for FM and [Level2] for MW/LW are available
only with the stations with the strongest signals.
Menu Item
[FM Step]*1
[100kHz] [50kHz]
[Regional]*2
[On] [Off]
[Alternative FREQ]*2
[On] [Off]
[Auto PI]*1
[On] [Off]
[TA Interrupt]*2*3
[DAB+RDS TA]
[RDS TA ONLY]
[TA OFF]
[News Interrupt]*2
[On] [Off]
[Tuner Sound]*2
[Talk]
[Standard]
[Music]
*1 This setting is available when the source is turned off.
*2 This function is available only when you receive the FM band.
*3 AVIC-Z910DAB/AVIC-Z810DAB/AVIC-Z710DAB/AVIC-Z7110DAB
Description
Select the seek tuning step for the FM band.
NOTE
The tuning step remains at [50kHz] during manual
tuning.
Switches whether the area code is checked
during the Auto PI search.
Allow the unit to retune to a different frequency
providing the same station.
Searches for the same PI (Programme
Identification) code broadcast station from all
frequency bands automatically when the
broadcasting station contains RDS data.
NOTE
Even if you set to [Off], the PI search is automatically
performed when the tuner cannot get a good
reception.
Receives the traffic announcement from the last
selected frequency, interrupting the other
sources.
TIP
The selected setting also applies to [TA Interrupt]
under [DAB Settings].
Receives current traffic information for DAB and
RDS (DAB has priority) if available.
Receives current traffic information for only
DAB+RDS TA if available.
Disables this function.
Interrupt the currently selected source with
news programmes.
Switches the sound quality of the FM tuner.
Gives priority to noise prevention.
Gives no effect.
Gives priority to the sound quality.