Pioneer AVIC-Z710DAB Operation Manual page 27

Menu Item Description
[Period Charge] Set to off to avoid prioritising toll roads for calculating the
route.
This function is useful when you want to avoid toll roads
with restricted time access that require you to purchase a
separate pass or vignette to extend the length of time
allotted for use.
NOTE
This option can be enabled or disabled separately from the pre-
use toll road usage option.
[Per-use Toll] Set to off to avoid prioritising per-use charged toll roads for
calculating the route.
NOTE
This function is useful when you want to avoid toll roads where
there is a per-use charge.
[Ferries] Set to off to avoid prioritising ferries for calculating the
route.
[Car Shuttle Trains]* Set to off to avoid prioritising car shuttle trains for
calculating the route.
[Carpool Lanes] Set to off to avoid prioritising carpool and HOV lanes for
calculating the route.
[Unpaved Roads] Set to off to avoid prioritising unpaved roads for
calculating the route.
* Car shuttle trains are used to transport vehicles for relatively short distances and they usually
connect places that are not easily accessible by road.
[Sound]
Adjusts the different sound volumes and changes the voice guidance profile.
Menu Item Description
[Voice] Adjust the volume of the guidance sounds (verbal
instructions).
[Alert Beeps] Adjust the volume of the non-verbal alert sounds (beeps).
[Ding] Adjust the volume of the sound (ding) that precedes the
verbal instructions.
[Voice Guidance] Enable or disable voice guidance.
[Announce Streets and Select whether to have the navigation system announce
Roads in Native Language the street names in the native language of the area, only
Area]* the road numbers, or only the manoeuvres.
Menu Item Description
[Announce Streets and Select whether to have the navigation system read the
Roads in Foreign street names in a foreign country, only the road numbers,
Language Area]* or only the manoeuvres.
[Early Indication of Select whether you want an immediate announcement for
Manouevres] the next manoeuvre or to receive the information when
the manoeuvre is near.
[Verbosity Level] Set the verbosity of the voice instructions.
(How much information is given and how often the
prompts occur.)
[Minimal] Given once right before the next manoeuvre.
[Medium] Given once as the vehicle approaches the next manoeuvre
and it is repeated right before the manoeuvre.
[Verbose] Given once relatively far from the next manoeuvre, it is
repeated as the vehicle approaches the next manoeuvre,
and it is repeated again right before the actual manoeuvre.
[Announce Route Select whether to have the navigation system announce by
Summary]* voice a quick summary of the route whenever a route is
calculated.
[Announce Country Info]* Select whether to read out information about the country
you have just entered when crossing country borders.
[Announce Traffic Info]* Select whether to have the navigation system announce by
voice the traffic information whenever a traffic incident on
your route is received.
[Announce System Select whether to read out the message when a system
Messages]* message appears.
* Enabled only when a TTS-voice is selected for the voice language.
[Warnings]
Enables or disables warnings and sets up the warning function.
Important
• This system is able to warn you if you exceed the current speed limit. This information may not be
available for your region (ask your local dealer), or may not be fully correct for all roads on the map.
• You are liable for ensuring that using this feature is legal in the country where you intend to use it.
Menu Item Description
[Speed Warning] Set the type of speed and alert warnings.
[Warn When Speeding] Select whether to receive visible and/or audible warnings.
[Disabled] No warnings will go off.
27
En