Pioneer AVIC-Z710DAB Operation Manual page 16

TIP
When entering the coordinates in UTM format, touch
3
Enter the longitude value and touch [GO!].
The searched location appears on the map screen.
4
Touch [Select as Destination].
TIP
You can change the display format of the latitude and longitude to any of the following formats:
decimal degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds.
NOTE
When a value is already entered in the text field, delete the value first.
Searching for a location by scrolling the map
Specifying a location after scrolling the map enables you to set the position as a
destination or waypoint.
1
Press .
2
Touch and drag the screen to scroll the map.
3
Touch the location that you want to select as your destination.
The cursor appears.
4
Touch [Select as Destination].
Selecting the route options
Once a location is searched, the [Map Location] screen appears. You can select some
options for the route or displayed map location before route calculation.
TIP
If you touch the map, the cursor is placed at that position. Also, you can scroll the map by dragging the
map.
16
En
, then [UTM Coordinates].
Zoom in/zoom out
TIP
You can also pinch or expand the map to zoom in or out.
Cancels the [Map Location] screen and displays the map of the current
position.
Returns the cursor to the initial position and the map scale to the initial scale.
Shows the route setting preferences for route calculation. Touch the keys to
activate or deactivate the preference.
: Calculates the route prioritising the use of motorways when the key is
activated.
: Calculates the route prioritising the use of per-use charged toll roads when
the key is activated.
: Calculates the route prioritising the use of ferries when the key is activated.
: Calculates the route prioritising the use of carpool and HOV lanes when the
key is activated.
Returns to the previous screen.
Sets the cursor position to your destination (or waypoint).
Displays the shortcuts.
• [Detailed Information]:
Shows the detailed information of the point.
• [Save Location]:
Saves the displayed location as your favourite location. The saved location can
be easily recalled later.
• [Places Around Cursor]:
Searches for POIs around the displayed location. Touch the POI to show the [Map
Location] screen, and also set the POI as the destination (or waypoint).