Searching By Pty Information; Storing The Strongest Broadcast Frequencies (Bsm); Radio Settings - Pioneer AVIC-Z910DAB Operation Manual

• By pressing then touch and hold or

Searching by PTY information

You can tune into a station using PTY (Programme Type Identification) information.
NOTE
This function is available when the FM tuner is selected.
1
Touch .
2
Touch or to select the item.
The following items are available:
[News&Info], [Popular], [Classics], [Others].
3
Touch to start searching.
TIP
If you touch [Cancel], the searching process is cancelled.

Storing the strongest broadcast frequencies (BSM)

The BSM (best stations memory) function automatically stores the six strongest
broadcast frequencies under the preset channel keys [1] to [6].
NOTES
• Storing broadcast frequencies with BSM may replace those you have already saved.
• Previously stored broadcast frequencies may remain stored if the number of frequencies stored has
not reached the limit.
1
Touch the preset channel list display key.
2
Touch to begin search.
While the message is displayed, the six strongest broadcast frequencies will be
stored under the preset channel keys in the order of their signal strength.
To cancel the storage process
1
Touch [Cancel].

Radio settings

1
Press .
2
Touch then .
The system setting screen appears.
and releasing it, you can also perform seek tuning.
3
Touch [AV Source Settings].
4
Touch [Radio Settings].
The menu items vary according to the source.
Menu Item
[Local]
[Off]
FM: [Level1] [Level2] [Level3] [Level4]
AM: [Level1] [Level2]
[FM Step]*1
[100kHz] [50kHz]
[AM Step]*1
[9kHz] [10kHz]
[Regional]*2
[On] [Off]
[Alternative FREQ]*2
[On] [Off]
[Auto PI]*1
[On] [Off]
[TA Interrupt]*2
[DAB+RDS TA]
[RDS TA ONLY]
[TA OFF]
Description
Local seek tuning allows you to only tune into
radio stations with sufficiently strong signals.
NOTE
[Level4] for FM and [Level2] for AM are available only
with the stations with the strongest signals.
You can switch the seek tuning step for the FM
band, and the seek/manual tuning step for the
AM band.
NOTE
For the FM band, the manual tuning step is fixed to 50
kHz.
Switches whether the area code is checked
during the Auto PI search.
Allow the unit to retune to a different frequency
providing the same station.
Searches for the same PI (Programme
Identification) code broadcast station from all
frequency bands automatically when the
broadcasting station contains RDS data.
NOTE
Even if you set to [Off], the PI search is automatically
performed when the tuner cannot get a good
reception.
Receives the traffic announcement from the last
selected frequency, interrupting the other
sources.
TIP
The selected setting also applies to [TA Interrupt]
under [DAB Settings].
Receives current traffic information for DAB and
RDS (DAB has priority) if available.
Receives current traffic information for only
DAB+RDS TA if available.
Disables this function.
43
En