Table of Contents
Advertisement
Table 1
Drive Specifications Summary (continued)
Drive Specification
Operational Shock
Non-Operational Shock
Vibration, operating
Vibration, non-operating
Non-recoverable read errors
Rated workload
Warranty
Load-unload cycles
Supports Hotplug operation per the
Serial ATA Revision 3.2 specification
1.
One GB equals one billion bytes when referring to hard drive capacity.
Accessible capacity may vary depending on operating environment and formatting.
†
Seagate does not recommend operating at sustained case temperatures above 60°C.
Operating at higher temperatures will reduce useful life of the product.
If the drive is powered-off before issuing flush cache command, in some instances,
Note
the end user data in the DRAM cache might not be committed to the disk.
2.1
Formatted Capacity
Model
Formatted Capacity
2TB model
2000 GB
1TB model
1000 GB
500GB model
500 GB
1.
One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary
depending on operating environment and formatting.
2.1.1
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guaranteed
sectors as defined above.
Refer to
Configuring and Mounting the Drive
of drives with capacities over 137 GB.
Seagate BarraCuda Product Manual, Rev. F
ST2000LM010,
ST2000LM015
Average annualized workload rating: <55 TB/year.
The specifications for the product assumes the I/O workload does not exceed the average
annualized workload rate limit of 55 TB/year. Workloads exceeding the annualized rate may
degrade and impact reliability as experienced by the particular application. The average
annualized workload rate limit is in units of TB per calendar year.
To determine the warranty for a specific drive, use a web browser to access the following
web page: http://www.seagate.com/support/warranty-and-replacements/.
From this page, click on the "Is my Drive under Warranty" link. The following are required to
be provided: the drive serial number, model number (or part number) and country of
purchase. The system will display the warranty information for the drive.
(1)
Guaranteed Sectors
3,907,029,168
1,953,525,168
976,773,168
on page 22 (words 60-61 and 100-103) for additional information about 48-bit addressing support
ST1000LM038,
ST500LM030, ST500LM032
ST1000LM048
400 Gs at 2 ms max
1000 Gs at 1 ms max
5–200 Hz: 2.0 Gs
201–500 Hz: 1.0 Gs
5–500 Hz: 5.0 Gs
14
1 per 10
bits read
600,000 at 25°C, 50% rel. humidity
Yes
Bytes per Sector
512 (logical) /
4096 (physical)
Drive Specifications
and ST500LM033
9
Advertisement
Table of Contents
