Bonavita BV1500TD Manual page 7

AB O UT YOU R
BO NAVITA
CO FF EE BR EWER
The heaters in the Bonavita coffee
brewers are designed to deliver
the correct temperature water over
the correct brewing time. For ideal
extraction levels, brew your coffee
in 3-5 cup batches. Brew with fresh,
filtered, cold water whenever possible.
Brewing time is about 5 minutes for
5 cups of coffee. This will allow for
proper water flow and saturation time.
Before first use
1. Remove packaging materials,
labels, and stickers from the
coffee brewer.
2. Wash filter basket and stainless
steel thermal carafe with a mild
dish detergent
3. Plug brewer in. The blue light will
stay illuminated until the time is
programmed, or up to one minute
after the brewer is plugged in. The
time will flash "am 12:00" until the
time is programmed.
4. Set the time of day with the
HR and MIN buttons to the
right of the display. When you
have selected the time, press
the PROG button to save the
selection.
5. If you do not press the PROG
button after you have selected the
time, the time will automatically
be set to "am 12:00" after 5
seconds.
6. You can tell that the time is
programmed when the numbers
do not flash, and the ":" does not
flash.
7. If the display is not flashing, press
and hold either the HR or MIN
button for 5 seconds. The display
will flash, then set the time, and
press PROG to save the time.
8. Read the BREWING
INSTRUCTIONS section.
9. Clean the brewer by filling the
water tank with fresh, filtered, cold
water to the MAX line.
10. Turn on the brewer, and allow the
water to run through a brew cycle.
11. Let the brewer cool down for
5 minutes before repeating the
process at least 2 more times
before brewing coffee.