Table of Contents
Advertisement
3. Turn the socket counterclockwise and remove it.
4. Pull the bulb straight out to remove it.
5. Push the new bulb straight into the socket.
6. Reverse Steps 1 through 3 to reinstall the license
plate lamp assembly.
Replacement Bulbs
Exterior Lamp
Fog Lamp (Up Level Only)
License Plate Lamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected for wear
or cracking. See Owner Checks and Services on
page 6-10.
It is a good idea to clean or replace the wiper blade
assembly on a regular basis or when worn. For proper
windshield wiper blade length and type, see
Bulb Number
Maintenance Replacement Parts on page 6-16.
H11LL
To replace the wiper blade assembly:
W5WLL
1. Turn the ignition to ON/RUN with the engine off.
2. Turn on the windshield wipers and turn them
3. Pull the windshield wiper assembly away from the
off again when the wipers are in the out-wipe
position. The driver side blade will be straight up
and down on the windshield.
windshield.
5-61
Advertisement
Chapters
Table of Contents
