Pairing A Phone - Cadillac 2009 CTS Owner's Manual

Pairing a Phone

b g
1. Press and hold
•
For vehicles without a navigation system,
the system responds with "Ready" followed
by a tone.
•
For vehicles with a navigation system, the
system responds with a tone. After the tone
say "Hands Free". The system responds
with "Ready" followed by a tone.
2. Say "Bluetooth". The system responds with
"Bluetooth ready" followed by a tone.
3. Say "Pair". The system responds with instructions
and a four digit PIN number. The PIN number will
be used in Step 4.
4. Start the Pairing process on the cell phone that will
be paired to the vehicle. Reference the cell phone
manufacturers user guide for information on
this process.
Locate the device named "General Motors" in the
list on the cellular phone and follow the instructions
on the cell phone to enter the four digit PIN number
that was provided in Step 3.
for two seconds:
5. The system prompts for a name for the phone. Use
a name that best describes the phone. This name
will be used to indicate which phone is connected.
The system then confirms the name provided.
6. The system responds with "<Phone name> has
been successfully paired" after the pairing process
is complete.
7. Repeat Steps 1 through 7 for additional phones to
be paired.
Listing All Paired and Connected Phones
b g
1. Press and hold
•
For vehicles without a navigation system,
the system responds with "Ready" followed
by a tone.
•
For vehicles with a navigation system, the
system responds with a tone. After the tone
say "Hands Free". The system responds
with "Ready" followed by a tone.
2. Say "Bluetooth". The system responds with
"Bluetooth ready" followed by a tone.
3. Say "List". The system lists all the paired Bluetooth
devices. If a phone is connected to the vehicle, the
system will say "Is connected" after the connected
phone.
for two seconds:
3-111