Port Traffic Class Information - Enterasys Vertical Horizon VH-2402S Web Management Manual

Port Traffic Class Information

This switch provides two priority levels with strict priority queuing for port
egress. This means that any frames with a default or user priority from
0~3 are sent to the low priority queue "0" while those from 4~7 are sent to
the high priority queue "1" as shown in the following screen:
Parameter
Port
User Priority
30 Configuring and Monitoring the Switch
Figure 3-23. Port Traffic Class Information
Description
Numeric identifier for switch port.
Shows that user priorities 0~3 specify the low priority queue and
4~7 specify the high priority queue.
.
.
.
VH-2402S/VH-2402S2