Technical Specifications - Omcan BS-CN-1651-T Instruction Manual

Technical Specifications

Model
Electrical
Power
Diameter of Wheel
Length of Saw
Material of Saw
Line Speed of Saw
Blade
Dimensions of Working
Table
Thickness of Table
Max Slicing Thickness
Max Height of Cutting
Speed of Motor
Weight
Packaging Weight
Packaging Dimensions
Item Number
Installation
Place the machine in a stable and flat location. Especially when assembling or disassembling. If the surface
is not completely flat,you can adjust the rubber feet to compensate. Please ensure that the power supply is
the same as indicated on the rating label and is properly grounded. Please ensure that the power cable is
long enough to reach the power source comfortably and that the cable is not damaged. When the machine is
opened by the user, please inspect the saw belt length on the top and bottom block, it is must be parallel with
the edge of the block. Close the machine's door and connect to the power source, turn on the green switch,
and then the machine is ready for operation. If you turn off the red switch, the machine will shut down.
PLEASE ENSURE THE BELOW AT ALL TIMES:
1. The machine should be running correctly (clockwise).
2. If the saw blade is loose, please turn the handle on the top until tightened. When properly tightened, the
machine will slice correctly and can now be operated safely.
NOTES:
1. During installation, please pay attention to direction of the blade, the blade must be facing the correct
direction.
2. The scraper must be installed properly with the saw blade. If it is improperly installed, it will cause more
BS-CN-1651-T
110V / 60Hz / 1
750W
8.3" / 211mm
65" / 1651mm
16m/s
17.3" x 18.3"
440 x 465mm
0.1" / 3mm
6.3" / 161mm
9.4" / 238mm
89.5 lbs. / 40.6 kgs.
126.1 lbs. / 57.2 kgs.
19.7" x 20.5" x 40.2"
550 x 520 x 1020mm
46785
6
BS-CN-2020
220V / 60Hz / 1
1500W
9.8" / 250mm
79.5" / 2020mm
High-Carbon Steel
18.8m/s
22.2" x 26.3"
565 x 668mm
8" / 202mm
12" / 304mm
1400r/min
265.4 lbs. / 120.4 kgs.
340.8 lbs. / 154.6 kgs.
26.4" x 29.3" x 63"
670 x 745 x 1600mm
46786
BS-CN-2400
2200W
11.8" / 300mm
94.5" / 2400mm
22.6m/s
30.2" x 29.1"
767 x 738mm
0.2" / 4mm
9.9" / 252mm
14" / 355mm
310.9 lbs. / 141 kgs.
409 lbs. / 185.5 kgs.
32.3" x 34.4" x 68.3"
820 x 875 x 1735mm
46787