_Accessories
B elow, you will find an overview of the accessories
A c c e s s o r i e s
included and information on how to use them correctly.
Caution!
When removing dishes, make sure that the turntable
does not move. Make sure that the turntable is properly
locked. The turntable can turn left or right.
Accessories included
Special accessories
You can obtain further accessories from the after-sales
service or from specialist retailers.
Special accessories
Glass roasting dish
For pot roasts and bakes that you prepare in the oven.
Pizza tray
For pizzas and large round cakes.
Steamer for microwave appliances
For steaming food more quickly and more gently.
--------
Turntable
Food that requires a lot of heat
from below can be cooked
directly on the turntable.
The turntable can turn
Note:
clockwise or anti-clockwise. It is
scratch-resistant. You can slice
pizza directly on the turntable.
Low wire rack
For the microwave and for
baking and roasting in the oven.
Place the wire rack onto
Note:
the turntable.
Tall wire rack
Wire rack for grilling, e.g. steak,
sausages or bread, or for
setting down cookware, e.g.
shallow ovenproof dishes.
Place the wire rack onto
Note:
the turntable.
KBefore using for the first
time
B efore you can use your new appliance, you must
B e f o r e u s i n g f o r t h e f i r s t t i m e
make some settings. You must also clean the cooking
compartment and accessories.
The appliance must be fully installed and connected to
the mains.
Fitting the turntable
As shown in the figure, place the turntable with rollers
"A" onto the turntable drive coupling "B" in the centre of
the cooking compartment floor.
Notes
Never use the appliance without the turntable
■
The turntable must sit straight on the turntable drive
■
coupling.
The turntable must turn, whichever heating function
■
is being used.
The maximum load for the turntable is 5 kg.
■
Initial use
After connecting the electricity supply or after a power
cut, the display prompts you to set the time. It may take
a few seconds for the instruction to appear.
Setting the time
During initial use, the time display is highlighted.
The‚ƒ:‹‹ value flashes in the display and the 0
symbol lights up. Set the time.
Use the rotary selector to set the time.
1.
Touch 0.
2.
The time has now been set.
Changing the time on the clock
To change the time on the clock, you will need to
Note:
switch off the appliance.
Touch the 0 button twice.
1.
The 0 symbol and the clock time will appear on the
display.
Set the clock using the rotary selector.
2.
Touch the 0 button.
3.
The time has now been set.
Accessories
en
11