Operating The System - Philips FW350C Manual

All manuals and user guides at all-guides.com

OPERATING THE SYSTEM

STEREO REC DBB
OPTIMAL JAZZ
I S
NEWS HSD
REPLAY FM MW LW AM
DSC DBB
REPEAT SHUFFLE
PROGRAM TIMER
TECHNO ROCK
FW 318C
DIGITAL SOUND CONTROL
CD TUNER
STANDBY . ON CD 1 • 2 • 3 BAND TAPE 1 • 2
DUBBING
TUNING DEMO
NORMA•HIGH NORM•FAST RECORD RECORD A. REPLAY REPLAY
SEARCH
STOP•CLEAR PLAY PAUSE
Important:
Before you begin operating the
system, complete the preparation
procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system. When the system is switched
on for the first time, the demonstration
mode will start automatically.
Note:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
mode, the demonstration will resume
five seconds later.
10
Untitled-12 10
Easy Set
RDS NEWS!
EASY SET allows you to store all available
PM CLOCK
MAX
PROGRAM
TIMER
radio stations in a particular band (FM,
MW or LW) automatically.
1 Press and hold STANDBY•ON (on the
TAPE AUX
VIDEO
PRESET
n
MIC LEVEL
PREV NEXT
To stop the demonstration mode
• Press and hold STOP•CLEAR Ç (on
the system only) for five seconds when
2 The system will proceed to set the RDS
the system is in demonstration mode.
™ The demonstration will stop.
™ The system will switch to standby
• When searching RDS station;
mode.
Note:
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
To start the demonstration mode
• Press and hold STOP•CLEAR Ç (on
• When searching RDS time;
the system only) for five seconds when
the system is in standby mode.
™ The demonstration will begin.
™ When RDS time is read, "RDS
TIME" will be displayed. The
current time is displayed for 2
seconds and will be stored
automatically.
Notes :
system only) for 5 seconds; when the
– When EASY SET is used, all previously
system is in standby or demonstration
stored radio stations will be erased.
mode.
– The last preset radio station or the first
™ "EASY SET" will be displayed and
available RDS station will appear on the
followed by "TUNER".
display when EASY SET is completed.
™ EASY SET will start with the last
– If RDS station does not transmit RDS
active band.
time within 90 seconds, the program
™ All available radio stations with
will exit automatically and the display
sufficient signal strength will be
will show " NO RDS TIME ".
stored or until 40 presets are filled.
Switching the system ON
time automatically with the stored RDS
• Press STANDBY•ON (on the system
preset station.
only) , CD, TUNER, TAPE or AUX.
™ "SEARCH RDS STATION" will
You can also switch on the system by
be displayed. If no RDS station is
pressing any one of the CD DIRECT PLAY
available, the program will exit
buttons.
automatically and "NO RDS
STATION" will be displayed.
Switching the system to
™ After a station is found, "EASY
standby mode
SET" will be displayed and followed
by "TIME".
• Press STANDBY•ON again.
™ The system will switch to standby
™ "SEARCH RDS TIME" will be
mode.
displayed.
6/15/00, 3:34 PM
3139 116 18652