Recording - Philips FW350C Manual

All manuals and user guides at all-guides.com

RECORDING

STEREO REC DBB
OPTIMAL JAZZ
I S
NEWS HSD
REPLAY FM MW LW AM
DSC
DBB
REPEAT SHUFFLE
PROGRAM TIMER
TECHNO ROCK
DIGITAL SOUND CONTROL
CD TUNER
CD 1 • 2 • 3 BAND TAPE 1 • 2
STANDBY . ON
DUBBING
TUNING DEMO
NORM•FAST RECORD A. REPLAY
SEARCH STOP•CLEAR PLAY PAUSE
OPEN OPEN
TAPE 1
18
Untitled-12 18
Notes:
RDS NEWS!
– For recording, use only tape of IEC type I
PM MAX CLOCK
TIMER PROGRAM
– The tape is secured at both ends with
TAPE AUX
– The recording level is set automatically,
VIDEO
PRESET
n
– To prevent accidental recording, break
PREV NEXT
– If " CHECK TAPE " is displayed, the
OPEN OPEN
TAPE 2
One Touch Recording
• For One Touch Recording, as soon as you
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording.
3 Press STOP Ç to stop recording.
Note:
– When you press RECORD at TAPE mode,
Dubbing tapes
tape deck 2)
(normal tape) or IEC type II (Chrome).
1 Press TAPE to select tape deck 2 .
2 Load the prerecorded tape into tape
leader tape. At the beginning and end
deck 1 and a blank tape into tape deck
of tape, nothing will be recorded for six
2.
to seven seconds.
™ Make sure that the tape in tape deck
1 has its full spool to the left.
regardless of the position of VOLUME or
3 Press DUBBING once for normal
DBB.
speed dubbing or twice within 2
seconds for high speed dubbing.
out the tab on the left shoulder of the
™ "NORMAL" (normal speed) or
tape side that you want to protect.
"FAST" (high speed) will be
displayed and then followed by
protection tab has been broken. Put a
"DUBBING".
piece of clear adhesive tape over the
™ HSD flag appears on the display for
opening. Do not cover the Chrome tape
high speed dubbing.
detection hole when covering the tab
• Dubbing will start immediately.
opening.
™ REC flag starts flashing.
4 Press STOP Ç to stop dubbing.
Notes:
– At the end of side A, flip the tapes to
press RECORD, the current source will
side B and repeat the procedure.
be recorded on tape deck 2.
– Dubbing of tapes is only possible from
tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of
the same length.
™ REC flag starts flashing.
– During high speed dubbing in Tape
mode, the sound is reduced to a low
volume.
– You can switch to other source while
" SELECT OTHER SOURCE " will be
dubbing.
displayed. One Touch Recording is not
possible at TAPE mode.
6/15/00, 3:34 PM
(from tape deck 1 to
3139 116 18652