Rog Effects; Nb Configuration; Sata Configuration - Asus ROG STRIX B450-E Gaming Manual

SVM Mode
This item allows you enable or disable CPU Virtualization.
Configuration options: [Disabled] [Enabled]
3.6.3

ROG Effects

The items in this menu allow you to configure the LEDs on your motherboard.
Onboard LED
This item allows you to enable all the onboard LEDs.
Configuration options: [Enabled] [Disabled]
3.6.4

NB Configuration

The items in this menu allows you to configure the VGA devices.
IGFX Multi-Monitor
This item allows you to enable or disable Internal Graphics Device Multi-Monitor Support for
add-ons VGA devices.
Configuration options: [Disabled] [Enabled] [HybridGraphics]
Primary Video Device
This item allows you to select the Primary Video Device that BIOS will use as output.
Configuration options: [IGFX Video] [PCIE / PCI Video]
3.6.5

SATA Configuration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
SATA Port Enable
This item allows you to enable or disable the SATA Device.
Configuration options: [Disabled] [Enabled]
SATA Mode
This item allows you to set the SATA configuration.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced Serial ATA features that
increases storage performance on random workloads by allowing
the drive to internally optimize the order of commands.
[RAID] Set to [RAID] when you want to create a RAID configuration from
the SATA hard disk drives.
ROG STRIX B450-E GAMING
3-15