Monitor Menu; Boot Menu - Asus ROG STRIX B450-E Gaming Manual

3.7

Monitor menu

The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Scroll down to display the other BIOS items.
Q-fan Configuration
Qfan Tuning
Click this item to automatically detect the lowest speed and configure the minimum
duty cycle for each fan.
AIO_PUMP Control
[Disabled] Disable the Water Pump control feature.
[Auto] Detects the type of water pump installed and automatically switches
the control modes.
[DC mode] Enable the Water Pump control in DC mode for 3-pin chassis fan.
[PWM mode] Enable the Water Pump control in PWM mode for 4-pin chassis fan.
3.8

Boot menu

The Boot menu items allow you to change the system boot options.
Fast Boot
[Disabled] Allows your system to go back to its normal boot speed.
[Enabled] Allows your system to accelerate the boot speed.
The following item appears only when you set the Fast Boot to [Enabled].
Next Boot after AC Power Loss
[Normal Boot] Returns to normal boot on the next boot after an AC power loss.
[Fast Boot] Accelerates the boot speed on the next boot after an AC power loss.
AMI Native NVMe Driver Support
This item allows you to enable or disable all NVMe device native OpROM.
Configuration options: [On] [Off]
Boot Configuration
Setup Mode
[Advanced Mode]
[EZ Mode]
ROG STRIX B450-E GAMING
This item allows you to go to Advanced Mode of the BIOS after
POST.
This item allows you to go to EZ Mode of the BIOS after POST.
3-19