Rog Effects; Cpu Storage Configuration; Onboard Devices Configuration - Asus ROG RAMPAGE VI EXTREME Manual

3.6.6

ROG Effects

The items in this menu allow you to configure the LEDs on your motherboard.
Onboard LED
This item allows you to enable all the onboard LEDs.
Configuration options: [Enabled] [Disabled]
3.6.7

CPU Storage Configuration

The items in this menu allow you to configure CPU storage configurations.
Due to CPU behavior, CPU RAID functions with Intel
Core™ X-series Processor 79xx, 78xx Series and Intel
3.6.8

Onboard Devices Configuration

The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
HD Audio Controller
This item allows you to use the Azalia High Definition Audio Controller
Configuration options: [Disabled] [Enabled]
M2_1(DIMM.2) source selection
[from CPU]
[from PCH]
PCIEx8_4 bandwidth configuration
[Auto]
[x8 mode]
28 Lane CPUs do not support PCIEx8_4 and M.2_2(DIMM.2) due to CPU limitations.
USB Type C Power Switch
[Auto]
[Enabled]
3-18
The bandwidth of M.2_1(DIMM.2) comes from the CPU, and is shared with
U.2. If M.2_1(DIMM.2) is populated, U.2 will be disabled.
The bandwidth of M.2_1(DIMM.2) comes from the PCH, and the PCIEx4
will be disabled.
PCIEx8_4 by default runs at x8 mode and M.2_2(DIMM.2) is disabled.
When M.2_2(DIMM.2) is populated, PCIEx8_4 runs at x4 mode.
PCIEx8_4 runs at x8 mode, and M.2_2(DIMM.2) is disabled.
The system will automatically detect your USB Type C devices and provide
suitable power if needed.
The USB Type C port will always provide power to your devices.
CPU RSTe only supports Intel
®
SSD modules.
®
Chapter 3: BIOS Setup
®