Table of Contents
Advertisement
en Troubleshooting
9 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
9.1 Malfunctions
Fault
The appliance is not
working.
9.2 Replacing the LED lights
WARNING ‒ Risk of electric shock!
When changing the bulb, the bulb socket contacts are
live.
▶
Before replacing the bulb, unplug the appliance
from the mains or switch off the circuit breaker in
the fuse box.
WARNING ‒ Risk of injury!
The light emitted by LED lights is very dazzling, and
can damage the eyes (risk group 1).
▶
Do not look directly into the switched-on LED lights
for longer than 100 seconds.
Note:
Only use bulbs of the same type and wattage.
8
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
▶
If the appliance is defective, call Customer Service.
1.
Disconnect the appliance from the power supply.
2.
Loosen and remove the bulb cover
3.
Unscrew the bulb
same type.
4.
Refit the bulb cover.
5.
Insert the mains plug and switch on the fuse again.
.
and replace it with a bulb of the
Advertisement
Table of Contents
