General Information; Safety Instructions; Applicability; Operating And Service Documents - Viessmann Vitoflame 200 Service Instructions Manual

General information

Safety instructions

Please follow these safety instructions closely to prevent accidents and
material losses.
Work on the equipment
Installation, initial start−up, inspection,
maintenance and repairs must only
be carried out by a competent
person (heating engineer/
installation contractor).
Before working on the equipment/
heating system, isolate it from the
mains electrical supply (e.g. by
removing a separate mains fuse or
by means of a mains electrical
isolator) and safeguard against
unauthorised reconnection.
Repair work
It is not permitted to carry out
repairs on parts that fulfil a safety
function.
Use only original Viessmann spare
parts, or equivalent parts that have
been approved by Viessmann.

Applicability

from serial no.
7159805 2 00001 kkk, 7159806 2 00001 kkk, 7159807 2 00001 kkk,
7159810 2 00001 kkk, 7170760 2 00001 kkk, 7170761 2 00001 kkk,
7170762 2 00001 kkk, 7170763 2 00001 kkk

Operating and service documents

1. Complete and detach the
customer registration card:
H Give the system user this part
for safe−keeping.
H Retain the heating engineer part.
2
Initial start−up
The initial start−up must be carried
out by the system installer or a
designated commissioning engineer.
All actual values should be recorded
in a commissioning/service report.
Instructing the system user
The system installer must hand the
operating instructions to the system
user and instruct him/her in the
operation of the system.
2. Keep all parts lists, operating and
service instructions in the folder
and hand this over to the system
user.
The installation instructions will
not be required after the
installation is completed, and may
therefore be discarded.