Connecting The Condensate Drain; Condensate Drain; Connecting The Neutralising System (Accessories) - Viessmann Vitocrossal 100 Installation Instructions For Contractors

Gas condensing boiler with matrix cylinder burner open flue and room sealed operation
Table of Contents

Advertisement

Connecting the condensate drain

Condensate drain

Connect the trap with the plastic hose to the drain-
age system.
Route the condensate drain with a fall and below the
anti-flooding level of the flue gas collector.

Connecting the neutralising system (accessories)

Installation instructions "Neutralising system"
C
Fig. 45
Drain hose from trap to neutralising system,
A
external
of connection: 17 mm
7
Drain hose from neutralising system to drainage
B
system
Neutralising system
C
38
A
B
Fig. 46
1. Place neutralising system
2. Loosely route drain hose
3. Connect neutralising system drain hose
The condensate drain must be freely accessible for
inspection where it enters the drainage system.
External
of connection: 17 mm
7
C
Position of neutralising system
the front. Use a long drain hose
neutralising system can be pulled out forwards.
system to the trap. Connect drain hose
trap.
drainage system.
C
under the boiler from
C
, so that the
A
from the neutralising
A
to the
A
B
to the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ci1

Table of Contents