Certificates; Declaration Of Conformity - Viessmann Vitocell 140-E Installation And Service Instructions For Contractors

Certificates

Declaration of conformity

We, Viessmann Werke GmbH & Co KG, D-35107 Allendorf, confirm as sole respon-
sible body that the products Vitocell 140-E and Vitocell 160-E comply with the fol-
lowing standards:
DIN 4753
DIN EN 12897
AD2000 datasheets
These products are designated _-0036 in accordance with the following Directive:
97/23/EC
Details according to the Pressure Equipment Directive (97/23/EC):
■ Heated pressure vessel (not at risk from overheating)
■ Heating water part according to Article 3, Section (3)
■ Solar part according to Category II, Diagram 5
■ Modules B and C 1 according to appendix III
■ Materials according to AD2000 regulations, individual assessment and
Appendix I, 4.2, b)
■ Corrosion supplement to Appendix I, 2.2 and AD2000 regulations
The pressure vessel was tested without fitted equipment (safety equipment).
It must be equipped in accordance with national regulations before installation and
commissioning.
As part of the energy assessment of heating and ventilation systems to DIN V
4701-10, as required by the EnEV, the product characteristics (see table on
page 50) can be used to determine system values for the products Vitocell 140-E
and Vitocell 160-E.
Allendorf, 28 November 2012
52
Viessmann Werke GmbH&Co KG
Authorised signatory Manfred Sommer