Vitocell without fitted Solar-Divicon
2.
1. At the back of the cylinder: Attach 6
clip fasteners to the edges of the right
and left sections of the insulation
jacket. Place the thermal insulation
jacket around the cylinder body.
Note
Leave the clip fasteners in the first
notch.
(cont.)
1.
3.
4.
2. Fit 4 clip fasteners above and 2 clip
fasteners behind the Vitotrans so that
they are evenly spaced.
3. Push the clip fasteners as close
together as possible.
4. Install the immersion heater EHE or
seal the hole with a cover.
Installation sequence
17