Installing The Cylinder Temperature Sensor - Viessmann Vitocell 140-E Installation And Service Instructions For Contractors

Installation sequence

Installing the cylinder temperature sensor

■ The cylinder temperature sensor is
supplied in the control unit pack.
■ Position the sensor on the outside of
the sensor retainer contact spring (not
in the groove) so that it is flush with the
front of the spring.
A
A Sensor well for cylinder temperature
sensor
40
■ Never wrap insulating tape around the
sensor.
■ Insert the sensor retainer with sensor
into the sensor well as far as possible.
1.
4.
2.
3.
5.