Vitocell With Fitted Solar-Divicon - Viessmann Vitocell 140-E Installation And Service Instructions For Contractors

Vitocell with fitted Solar-Divicon

Siting and levelling the Vitocell
1.
A
2.
B
A Type plate
Insert the adjustable feet into the legs as
far as possible, then adjust them to level
the heating water buffer cylinder.
Note
Never extend the adjustable feet beyond
a total length of 30 mm.
4.
3.
3x
B Bag with 3 adjustable feet
If no immersion heater is being installed,
seal the front female connection with the
supplied plug R1½ .
Installation sequence
21