The IC0164F-3074-K Flange Trim Kit (Fig. 1) is used to provide trim for recessed
Dual Warming Cabinets (Model DWC183074T-R2). The kit comes as a single
welded unit of three flanges. When installed, the flanges of this kit extend to the
bottom of the cabinet (Fig. 2 - shown in light blue for clarity).
1. To fit onto the Dual Warming Cabinet, from the back of the
warming cabinet, slide the Flange Trim kit to the cabinet's front
edge. The front edge of the flanges should be placed over the
top and side edges of the cabinet (Fig. 3 & Fig. 4- shown in green).
It should fit snug and flush with the front of the cabinet
2. The cabinet is ready to be moved into its assigned recessed
space.
Fig. 2: Flange Trim Kit on Cabinet
Information regarding this product is
subject to change without prior
notice.
Instruction for Use -
Installing the IC0164F-3074-K Flange Trim Kit
on DWC183074T-R2 Dual Warming Cabinets.
Fig. 3: Slide Flange Kit over top front edge
To place an order, phone customer service at 618-476-3550
or 877-828-9975 or email sales@macmedical.com
1
Instruction for Use
Fig. 1: IC0164F-3074-K Flange Trim Kit
Fig. 4: Fit Kit over side front edge
Publication No. IFU-108 Rev B
Printed in USA
July 2017