8. If you connected your TV to the Internet, you have the option of setting up Live TV Pause.
page
31
explains how to set up and use this feature. If you don't want to set up Live TV Pause, or if this option
is not available to you, select Done to start watching Live.
Tip: Repeat the channel scan from time to time to make sure you are receiving all of the latest channels. Broad-
casters add and remove channels, move channels to different parts of the spectrum, and change the power levels
of their channels periodically. Your antenna reception and picture quality depend on the position of your antenna
and on your location relative to the antennas of broadcasters in your area.
Note: You'll have to repeat the channel scan if you remove the Antenna TV tile from the Home screen or perform
a factory reset. To repeat the channel scan at any time, go to Settings > TV inputs > Antenna TV > Scan again for
channels > Start finding channels.
Now, you're ready to watch broadcast TV! While you're watching, try the following:
• Press the UP and DOWN arrows to change channels.
• Press the LEFT arrow to display the channel list and then use the UP and DOWN arrows to select a channel to
watch. Or press REWIND or FAST FORWARD to jump through the channel list a page at a time.
• Press OK to display information about the current program.
• Press
to switch to the previously tuned channel.
• Press to see options for picture and sound settings.
Note: If
is not available on your remote control, you can use
universal remote. For more information, see
on the Roku App or the Jump Back button on a
"Other
devices" on page 66.
28
"Pausing Live
TV" on