Guided Setup; Starting Guided Setup - Hitachi Roku TV 50R8 Owner's Manual

Guided Setup

With the preliminaries out of the way, it's time to turn on your TV. As the TV starts for the first time, it leads you through
Guided Setup, which configures the TV before you start to use it.
During Guided Setup, you'll:
• Answer a few questions
• Provide network connection information
• Get a software update
• Link your TV to your Roku account.
• Connect devices such as a DVD player, game console, or cable box.
Note: Guided Setup runs only once, the first time you turn on your TV. If you need to run Guided Setup again,
you'll have to perform a factory reset, as explained in

Starting Guided Setup

To start Guided Setup, press the POWER button on the remote control to turn on your TV.
When you first turn on your TV, it will take a few seconds to get itself ready. You'll notice the following things happening:
1. The status light blinks every time the TV is busy doing something; in this case it's powering up and getting ready
for you.
2. The power-on screen appears and the status light blinks slowly for a few more seconds. The power-on screen
displays the Hitachi Roku TV logo while the TV starts up.
3. After a few seconds, Guided Setup starts:
Tip: On TVs sold in the United States, if you are blind or visually impaired, you can activate the Audio Guide, a
text-to-speech screen reader to help you navigate the TV's menus and commands.
To enable the Audio Guide, press the  button on the remote control four times in rapid succession. Repeat
to disable the Audio Guide. (The  button is located directly below the directional pad on the right side of the
Roku remote control.)
"Factory reset everything" on page 62.
13