8112p172.pdf | Imported from Cleveland on 1/17/2007
RS6200-TTL.book Page 13 Tuesday, December 5, 2000 2:54 PM
SELECTING VENTILATION DIRECTION
After connecting power supply cord, you must select proper ventilation
direction. If your microwave oven has been installed for room venting, turn
DIAL right. If your oven has been installed for roof or wall venting, turn DIAL
left. This is to be sure that exhaust air is vented correctly.
Step
Procedure
Plug in. Turn DIAL.
DIAL
1
Right
Left
Roof or Wall Venting
Push DIAL. or press any keypad.
2
Note: • If you do not select a ventilation direction, you can not use the oven.
• When you reset the ventilation direction or after a power interruption,
unplug the oven from the AC outlet and plug it in again and then reset
the proper ventilation direction.
SETTING CLOCK
To set the correct time of day, follow the steps below.
Example: To set 3:15:
Step
Procedure
Press Clock.
1
Turn DIAL until 3: is indicated in
2
the display.
Push DIAL .
3
Turn DIAL until 3:15 is indicated
4
in the display.
Push DIAL .
5
The clock begins operation.
Note: • If the clock (or display) shows any abnormality, unplug the oven from
the AC outlet. Plug it in again and then reset the clock.
• When your oven is plugged in for the first time or after a power
interruption, reset the clock.
• This is a 12-hour clock.
• You can use the oven without setting the clock.
• The clock display can be turned off. See page 18 (Optional Settings) for
more details.
CHILD LOCK-OUT
The oven has a safety feature which prevents use by children. This feature
locks the operation of the oven until canceled.
To set:
Step
Procedure
Push DIAL and hold for 4 seconds.
1
LOCK appears in the display.
To cancel:
Step
Procedure
Push DIAL and hold for 4 seconds.
1
LOCK disappears from the display.
Vent way
Room Venting
13
Keypad
Keypad
Keypad
Keypad