For Windows Nt4.0; Additional Agere Modem Notes - Encore ENF656-EV-AGER User Manual

56k analog modem

Hide thumbs Also See for ENF656-EV-AGER:

Table of Contents

8) To check if modem is properly installed:

Click "Start →Settings →Control Panel →Modems".

3.1.3 For Windows NT4.0

Windows NT4.0 Installation process:

1) This Fax Modem Installation CD does NOT support Windows NT4.0 autorun. Once you install modem

in Windows NT4.0 system, open the CD-ROM contents, and direct to Modem's NT4.0 driver.

2) Open the folder 'NT40' and then double-click on its install program.

Note: For locating modem's install program, please refer to the below list of Modem chipset and its

NT40 directory.

Agere

HPI56L: \\Driver\Agere(Lucent) \Internal\PCI2\NT40\setup.exe

Conexant

VPI56SP: \\Driver\Conexant\Internal\Controlless\NT40\SETUP.EXE

Intel

VPI56SPA: \\Driver\Intel(Ambient)\Internal\Controlless\NT40\installer.exe

3) Follow the instructions on the screen to install modem.

4) When ﬁnish the installation, we recommend you to restart your computer for system's setting before

you use the modem. Then, the Modem setup is now ﬁnished.

If you want to enable Agere's Modem-on-Hold (MoH) function, please go to the below directory and

execute its program:

For External Modem (VD56L): \Driver\Agere(Lucent)\External\MOH\LtMoh.exe

For Internal Modem (HPI56L5):\Driver\Agere(Lucent)\Internal\PCI5\MOH\LtMoh.exe

56K Analog Modem 10

Table of Contents

Do you have a question about the ENF656-EV-AGER and is the answer not in the manual?