Table of Contents
Advertisement
ITEM
PCL Setup
Font Height 4.00 point
(cont.)
Symbol Set PC-8
A4 Print
Width
White Page
Skip
SETTINGS
~
12.00 point
~
999.75 point
78 column
80 column
On/Off
39
– ES6405 User's Guide
EXPLANATION
Height of the PCL default font.
The value is displayed down to
the second decimal place (in
0.25 point increments).
Displayed only when the font
selected in Font Number is a
proportional-spacing, scalable
font.
Sets the symbol set of PCL (see
machine operator panel for
complete list).
Sets the number of characters
for A4 paper.
Auto LF.
This is for 10-CPI characters
when Auto CR/LF Mode is set to
OFF.
This menu is enabled only when
A4 paper is selected in the menu
that sets the print width of A4
paper in portrait orientation.
Usually, such A4 paper print
width is set slightly narrower
than 8 inches (about 7.93
inches).
This setting cannot print 80 10-
cpi characters (only prints up to
78 10-cpi characters). 80
characters set at A4 Print Width
widen the right and left margins.
A PCL command selects or
selects/deselects Auto CR/LF
mode.
Sets whether to eject a page
without any data to print (blank
page) upon reception of FF
command (OCH) in PCL Mode.
OFF: Ejecting.
Advertisement
Table of Contents
