Paper Recommendations - Oki ES6405 User Manual

Paper Recommendations

Your printer will handle a variety of print media, including a range
of paper weights and sizes, transparencies and envelopes. This
section provides general advice on choice of media, and explains
how to use each type.
The best performance will be obtained when using standard 20 lb.
US Bond (75 g/m²) paper designed for use in copiers and laser
printers.
Use of heavily embossed or very rough textured paper is not
recommended.
Pre-printed stationery can be used, but the ink must not offset
when exposed to the high fuser temperatures used in the printing
process.
Envelopes
Envelopes should be free from twist, curl or other
deformations. They should also be of the rectangular
flap type, with glue that remains intact when
subjected to hot roll pressure fusing used in this type
of printer. Window envelopes are not suitable.
Labels
Labels should also be of the type recommended for
use in copiers and laser printers, in which the base
carrier page is entirely covered by labels. Other types
of label stock may damage the printer due to the
labels peeling off during the printing process.
Recommended type is Avery White Label types 7162, 7664, 7666
(A4), or 5161 (Letter).
CAUTION!
CAUTION!
11
– ES6405 User's Guide