Oki ES6405 User Manual page 34

ITEM
Network NetWare
Setup
(cont.)
EtherTalk
Frame Type Auto
IP Address
Set
IPv4
Address
Subnet
Mask
Gateway
Address
Web
SETTINGS
Enable
Disable
Enable
Disable
802.2
802.3
Ethernet II
SNAP
Auto
Manual
xxx.xxx.xxx.xxx Sets the IPv4 Address.
xxx.xxx.xxx.xxx Sets the Subnet Mask.
xxx.xxx.xxx.xxx Sets the Gateway (default
Enable
Disable
34
– ES6405 User's Guide
EXPLANATION
Sets Enable/Disable of NetWare
Protocol.
Sets Enable/Disable of EtherTalk
Protocol.
Sets the frame type.
Display Condition: Netware
should be enabled.
Sets the IP Address setting
method.
Display Conditions:
• TCP/IP should be enabled.
• IP Version is not IPv6.
Display Conditions:
• TCP/IP should be enabled.
• IP Version is not IPv6.
Display Conditions:
• TCP/IP should be enabled.
• IP Version is not IPv6.
router) address. "0.0.0.0" means
that there is no router.
Display Conditions:
• TCP/IP should be enabled.
• IP Version is not IPv6.
Sets Enable/Disable of Web.
Enable: Web/IPP is available.
Disable: Web/IPP is not
available.
Display Condition: TCP/IP should
be enabled.