How To Turn On And Off; Maintenance And Storage; Disposal Of Batteries - maniquick MQ Perfect Manicure & Pedicure MQ746 Operating Instruction

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 15

HOW TO TURN ON AND Off

The on/off switch is located in front of the Mani/pedicure unit (See Figure 1, part A).
Slide up switch to the "1" or "2" position to turn ON and slide back to "0" position to
turn OFF.
The mani/pedicure set has 2 speeds: Position "1" is Low speed, position "2" is High
speed.
HOW TO ATTACH THE mANI/PEDICURE ACCESSORIES
To connect the attachments to the mani/pedicure unit, directly insert them into the magne-
tic metal holder. To remove, simply pull it out.
If you intend to use the transparent protective cap (b), you should insert it into the
compartment around the magnetic metal holder before inserting the mani/pedicure
attachment.
Long sandpaper roller (C) with 40mm length is used for hardened and callused skin
removal.
Small sandpaper roller (D) is used for removing the hardened and callused skin in
between the gap of the toes.
Sapphire grain cone (E) is used for removing the hardened and callused skin or
toenails.
Felt Cone (F) is used for polishing the toe nail after finishing the mani/pedicure.
Sapphire disk (G) is used for shortening and shaping the toe nails up to the corners.
Cylinder shaper (H) is used to file and remove the hardened skin and corn around the
toe area.
Adjustable transparent protective cap (B) is to avoid the mani/pedicure residue flying
everywhere during mani/pedicure treatment.

mAINTENANCE AND STORAGE

Never use benzene, thinners, or any other organic solvents to clean the products. Use
of these cleansers will damage the unit
Only a damp cloth should be used to clean the mani/pedicure unit and its attach-
ments
Store batteries away from metal objects.
Remove batteries if equipment is not going to be used for extended periods of time.
Store batteries in a cool dry place away from direct sunlight.

DISPOSAL Of BATTERIES

Remove exhausted batteries promptly and dispose them in their specific waste
container.
Do not put batteries in fire.
Never disassemble batteries
Do not attempt to revive batteries by heating, charging or other means

Advertisement

Table of Contents
loading

Table of Contents